Started Port Fuel Tank Bulkheads

I cut out the 3 bulkheads this morning. Then I was able to get two of them glassed on both sides this afternoon. Not much to look at.

Here are the two of them glassed on one side with the vacuum bag material over them. I put this plastic over them to try to get a fully cired surface. If you leave the resin open to the air it never really cures to a non-sticky surface. You have to add wax sol to the final coat of the resin. The wax rises to the surface during cure and coats the resin to keep the air out. Only problem is that the wax has to be completely cleaned off before you can get any more resin to stick. I will be glassing these into the hull so I need them to be wax free.