Making good progress on these bloody tank tops. I am actually working on the last one now. Need to buy more resin and glass to tab them in to the boat.
Work in progress. At this point I have cut the access ports, beveled the plywood on the underside and glassed the underside with 2 layers of biax cloth and layer of 1.5oz. mat.I beveled the plywood around the access ports so that there was no chance of water infiltrating the plywood core. There will be 12 holes drilled around the perimeter of each access port.
Another view of the underside after it is all cleaned up and ground ready to glue the stud plates in.
Here is the top side with the extra layers od mat added and ground ready to install the stud plates.
So Thursday I will finish this one and hopefully get it painted on the underside ready to install on Friday.
I think I will get the first coat on the other tops tomorrow afternoon so I can finish them Thursday ready to go in on Friday.
No comments:
Post a Comment